Watch the video: https://www.youtube.com/watch?v=gaJeEGAQOy4 (3 min)

A customer showed us a simple modification, and Mike shows how it works: adding small springs under the pilot controls on a Rippa excavator.

WHAT IT DOES

The springs add resistance to the pilot controls, which gives you finer control when you are doing delicate work.

HOW TO INSTALL

- Lift the control plate and bend it over.

- Slide a spring onto each of the four posts on each side.

- It takes about five minutes.

- The kits are inexpensive, about $11 to $13 for a pack, and the link is on our website's support and service pages.

FIT

- It works on the R15 and larger.

- It does not work on the R10, which has a different plate inside.

- The dealership plans to install the springs on every excavator that comes in.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.