Watch the video: https://www.youtube.com/watch?v=aitytP6bceY (14 min)

Mike parks the Rippa R22 next to the R32 and walks around both to show what the extra size gets you.

DIFFERENCES HE POINTS OUT

- Size: the R32 is a bit shorter in overall height, but its cab is wider, the machine is wider, and the track height is about 4 inches taller. At 6'1", Mike can walk under the R22's boom without ducking, and says the R32 will be more comfortable for most operators (no knock on the R22).

- Dozer blade: the R32 has a four-way blade, while the R22 has a straight up-and-down blade with wings.

- Chassis: the R22 has a retractable chassis so the tracks can narrow; the R32 does not.

- Heavy-duty parts: a thicker stick, a larger cylinder and a bigger bucket on the R32.

- Cab: the redesigned R32 cab has a purpose-built cubby for the backup camera, plus work lights for night operation.

Not sure which size fits your work? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com and we'll help you compare. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.

Watch the video: https://www.youtube.com/watch?v=Hi3RtYKONh8 (17 min)

Mike from Rippa USA Sales explains how to take care of your excavator from a grease standpoint, using the Rippa R22 as the main example (the R32, R18, R10 and mini skid steers are nearby too).

IN THIS VIDEO

- Introduction to maintenance

- Manual greasing technique

- How to find your grease points

- A walkthrough of the technical manual

- Why regular service matters

MANUAL GREASE GUN OR POWERED?

Mike prefers a manual grease gun. With a powered gun you do not know you have gone too far until grease squirts out the other side, which can mean you have already damaged or ruptured the seal. With a manual gun you can feel the pressure building in your hand each time you squeeze, so you know when to stop.

FINDING EVERY GREASE POINT

- Some fittings are hard to find, such as ones tucked behind the drive shaft or on the opposite side of the machine from where you expect them.

- The technical manual has drawings that show where each grease point is, including the swing support, the gear between the swing support and the swing motor, and the side swing cylinder.

- Mike took a screenshot of the diagrams and printed a copy to keep with the machine. New models also have stickers showing the grease points.

WHY GREASING MATTERS

It works like changing the oil in your vehicle. Without grease you get more metal on metal wear and the parts will not last. Outside of the engine, the swing gear and bearing is one of the most expensive parts on an excavator, and replacing it means pulling the cab and chassis off, so keeping it greased is cheap insurance.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.