Watch the video: https://www.youtube.com/watch?v=8s6T3iT2AFc (14 min)

Mike walks through the Rippa stump grinder attachment, the only stump grinder we sell. It's a side-to-side swing model, and this video covers how it hooks up and how to run it.

HOOKUP AND SETUP

- Two hydraulic lines plus an electrical connection.

- Route the lines through the machine's tie-down points to keep them out of the way.

- A continuous-flow setting keeps the cutter wheel spinning. It runs in one direction only, so don't use it in reverse.

- A winch-style controller swings the head side to side.

- The wheel brake stops the blade in about 1.5 seconds.

CARE AND USE

- The grinder is greasable, including the swing cylinder. Keep it greased.

- Lower the head onto the stump and sweep side to side.

- It weighs roughly 275 to 300 lb, so use caution when moving it.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.

Watch the video: https://www.youtube.com/watch?v=8R0DC4RYECI (2 min)

Customers had two main questions about the Rippa trencher attachment, and Mike answers them.

- Are the teeth removable? Yes. Remove the bolts and the teeth come right off.

- Does it cut in both directions? No. The teeth are shaped to cut in one direction only. You could fit bidirectional teeth or grind an angle on the existing ones, but because the teeth are tapered it won't cut as well.

A field demo in dirt is planned once the rain stops. Remember: you get 50% off attachments when you buy a machine from us.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.