Watch the video: https://www.youtube.com/watch?v=Ry6QctT7Z-k (5 min)

Mike from Rippa USA Sales takes a close look at the operator platform on the Rippa RS06 mini skid steer, with an RS03 parked next to it for comparison.

WHAT MAKES THE RS06 PLATFORM DIFFERENT

- The RS06 operator platform rides on four heavy duty springs, so when you stand on it you are fully supported instead of getting beaten up by every bump.

- Mike is 6 foot 1 and about 250 lb. Even leaning back as far as he can with both feet off the ground, the springs do not come close to bottoming out.

- The springs absorb the small dips and ruts you hit while driving, which makes for a much smoother ride.

- Mike pulled the springs out of one platform to show what is underneath: just a steel post with four holes where the springs sit. Without the springs you would bounce on every bump.

RS03 COMPARISON

- The RS03 platform is basically fixed in place, with no springs. It can move a little, but it does not give the cushioned ride of the RS06.

- The RS03 also uses a different throttle control and controls layout than the RS06.

MIKE'S SUGGESTIONS TO THE FACTORY

- Use consistent controls and sensors across the whole line.

- Add the ability to mount counterweight, around 100 lb on each side, to help lift a little more without being as front heavy.

These are Mike's opinions from the video and the details may change as the machines are updated. Check the RS06 page on RippaUSASales.com for current features.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.