Skip to Content

Powston: Where It All Starts, Laser-Cutting the Steel

Mike shows the very first step of building a Powston machine or attachment: cutting the steel.

Table of contents

No titles in the blog post

Watch the video: https://www.youtube.com/watch?v=tKS5n5KODeY (7 min)

Mike shows the very first step of building a Powston machine or attachment: cutting the steel.

WHAT YOU'LL SEE

  • Sheets of steel in different thicknesses, moved by overhead booms and suction-cup lifters, which are needed for plates up to half an inch thick.
  • A laser cutting machine cutting out parts for a planned run of excavator models, with workers checking quality and pulling out any pieces that don't meet standard.
  • Parts straight off the laser that are unpainted and untreated, showing clean, precise cuts.

Mike says it is the first stop in a chain that ends in a finished excavator or attachment, and that he appreciates the quality of the laser cuts.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.