Skip to Content

Rippa Excavator Mod: Pilot Control Springs for Smoother Control

Table of contents

No titles in the blog post

Watch the video: https://www.youtube.com/watch?v=gaJeEGAQOy4 (3 min)

A customer showed us a simple modification, and Mike shows how it works: adding small springs under the pilot controls on a Rippa excavator.

WHAT IT DOES

The springs add resistance to the pilot controls, which gives you finer control when you are doing delicate work.

HOW TO INSTALL

  • Lift the control plate and bend it over.
  • Slide a spring onto each of the four posts on each side.
  • It takes about five minutes.
  • The kits are inexpensive, about $11 to $13 for a pack, and the link is on our website's support and service pages.

FIT

  • It works on the R15 and larger.
  • It does not work on the R10, which has a different plate inside.
  • The dealership plans to install the springs on every excavator that comes in.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.