Skip to Content

Rippa R13 Mini Excavator Overview: The Narrow-Access Machine

A walk-around of the Rippa R13 mini excavator, about 29 inches wide and built for tight gates and narrow access.

Table of contents

No titles in the blog post

Watch the video: https://www.youtube.com/watch?v=3krjaliJZhU (9 min)

The Rippa R13 is a very small excavator, and that is exactly its use case. Mike gives a walk-around of the R13 at our Boyd, Texas dealership.

HIGHLIGHTS

  • Very narrow: about 29 inches wide at the outside edge of the tracks when retracted, which is what you need for tight gates and spaces.
  • Steel tracks with rubber inserts, for extra traction on such a narrow machine. Steel tracks cost much more than rubber.
  • True two-speed drive motors. Four hydraulic lines run to the motors, unlike the R10, which has only two.
  • Engine: a Kubota D722 (the R10 uses a Z-series Kubota engine).
  • Controls: unlike our other excavators, both pilot joysticks are activated by the safety levers, with a push-and-turn button for swing boom.
  • A plastic roof instead of metal, which Mike likes because metal roofs vibrate, and a handy mirror.
  • Service points: coolant, dipstick, battery shut-off, and a water separator that may be a bit tight to reach.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.