Skip to Content

Rippa RS06-2 Lift Arms: How the Boom and Bucket Move

A quick look at how the redesigned RS06-2 lift arms move, including how the bucket tilts as the boom rises and the 83 inch pin height.

Table of contents

No titles in the blog post

Watch the video: https://www.youtube.com/watch?v=qgOaksKs_Ps (1 min)

A customer asked to see how the redesigned lift arms on the RS06-2 behave, so Jake raises the boom on camera.

  • The arms were completely redesigned compared with the RS06-1.
  • It is not a true radial lift where the bucket stays level, but it's not as pronounced as a vertical lift either. It sits in the middle.
  • The bucket starts level, give or take a couple of degrees, and tilts as the arms rise.
  • At full height the pin height is 83 inches.
  • The machine was run at low idle for the video, so the arm speed shown isn't representative.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.