Skip to Content

Mini Skid Steer Tipping Risk: Be Careful With Heavy Attachments

A quick safety lesson on tipping risk: why heavy attachments can overbalance a mini skid steer and how to handle new ones carefully.

Table of contents

No titles in the blog post

Watch the video: https://www.youtube.com/watch?v=J67ICyrTP0o (1 min)

A quick safety lesson from Mike: some attachments aren't made for the RS03 or RS04 because they're simply too heavy to lift.

  • On an RS06 with a heavy attachment (the demo uses a large trencher-type attachment), the machine is just barely balanced. If someone stood on the back, it would lay down on the tracks.
  • In the video the rear of the tracks is only about 7 inches off the ground. Lift a little more and the machine would face-plant.

Takeaway: the first time you pick up any new attachment, go slowly, keep it low and know your machine's limits.

Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.