Mike shows where machine parts begin at Powston: the raw steel stock area. At volume, a factory buys flat plate and long bars and tubes, roughly 8 meters long, and cuts them to size for whatever is being built that day.
Watch the video: https://www.youtube.com/watch?v=Vz0Nmy3wSnw (4 min) Mike tests the lift strength of a prototype Powston PE650 mini skid steer with a new vertical-lift design, instead of the radial li...
After steel parts are cut, sharp edges and stray bits are ground off at three finishing stations at the Powston factory, so burrs do not get in the way of the robotic welders.
Watch the video: https://www.youtube.com/watch?v=7IlhVB9PoAU (20 min) Mike is in China checking that the Powston PE80, an 8 ton excavator, is exactly what his customers should receive. The day before,...
Watch the video: https://www.youtube.com/watch?v=NVfgYv4U6U4 (22 min) Mike gives a full reveal of the Powston PE65, the 6.5 ton excavator he ordered, with a closer look than his first quick video. (Th...
In part two, Mike repeats the lift test on a different Powston mini skid steer, an older style without the new lift mechanism, with a coworker standing on the platform for counterweight.
Watch the video: https://www.youtube.com/watch?v=NVfgYv4U6U4 (22 min) Mike gives a full reveal of the Powston PE65, the 6.5 ton excavator he ordered, with a closer look than his first quick video. (Th...
Watch the video: https://www.youtube.com/watch?v=8115t7GSAEY (13 min) Two Rippa R32-5 excavators sit side by side at our Boyd, Texas dealership, built a couple of months apart (plate dates of March an...
Watch the video: https://www.youtube.com/watch?v=R4-z4R4Bzjg (9 min) Mike gives a round-up of the Rippa RS04, the mini skid steer replacing the discontinued RS03, and shows the two engine choices side...
Watch the video: https://www.youtube.com/watch?v=EZPKqMiCEYE (5 min) Mike from Rippa USA Sales shows a small part that makes the Rippa breaker hammer for mini skid steers much easier to service: a nit...