At a Powston factory, Mike examines the track tensioner on a larger excavator, after an earlier video showed a customer's R57 whose tensioner was damaged.
Watch the video: https://www.youtube.com/watch?v=FxSOZbBnvaU (3 min) Mike walks through the parts area of a Powston assembly plant at shift change as workers restock shelves for the next shift. WHAT Y...
Watch the video: https://www.youtube.com/watch?v=VXeXIH4N7GQ (6 min) Mike tours the new powder coating and paint area at Powston's factory, in a building of roughly 800,000 square feet that the compan...
Mike shows where machine parts begin at Powston: the raw steel stock area. At volume, a factory buys flat plate and long bars and tubes, roughly 8 meters long, and cuts them to size for whatever is being built that day.
After steel parts are cut, sharp edges and stray bits are ground off at three finishing stations at the Powston factory, so burrs do not get in the way of the robotic welders.
At the end of a long week at the Rippa factory in China, Mike stops in the employee cafeteria to show the part of the visit that is not on the factory floor.
At a Powston factory, Mike examines the track tensioner on a larger excavator, after an earlier video showed a customer's R57 whose tensioner was damaged.
Watch the video: https://www.youtube.com/watch?v=CAOkccK4BRA (27 min) Mike walks the Rippa factory in China after a week of looking at larger excavators, and the site has grown a lot since his visit t...
Watch the video: https://www.youtube.com/watch?v=smRrq_bb064 (28 min) In the second half of his factory tour, Mike moves from the finished machines into the production areas of the Rippa factory. WHAT...
Watch the video: https://www.youtube.com/watch?v=FxSOZbBnvaU (3 min) Mike walks through the parts area of a Powston assembly plant at shift change as workers restock shelves for the next shift. WHAT Y...