Watch the video: https://www.youtube.com/watch?v=Jj8noWqYPtE (6 min)
Mike gets up close with a very large Powston excavator that will be painted with the Powston logo and arrive at our dealership later.
SIZE, AS SHOWN IN THE VIDEO
- About 4 feet of clearance from the underside to the ground.
- A bucket about 8.5 feet wide. The machine cannot fit in a shipping container and has to ship another way.
- Hydraulic lines far larger than on the Rippa R57 or the Powston P80, which use half-inch lines. Mike estimates a fitting of about an inch and a quarter and a line outside diameter near two inches.
- The top of the track is about five feet off the ground.
Mike also talks about greasing a machine this size, with extra grease fittings run to convenient spots so one person can pump grease while another turns the machine. He promises more detail on similar machines soon. Mike was limited in where he could point the camera at the factory.
Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.
