Watch the video: https://www.youtube.com/watch?v=BUrWO-XPSCc (10 min)
Every machine we sell goes through a formal, comprehensive inspection before it leaves our Boyd, Texas dealership. Mike explains what that means and now shares the checklist publicly.
WHAT WE DO ON EVERY MACHINE (RS03, RS04, RS06, R10, R15, R18, R22, R32, R57, R82, forklifts and more)
- Fill and check fluids, and replace the coolant with a mix rated to at least 20 below zero.
- Grease every fitting. We use a dark green extreme-duty grease, so you can see it when you pull the caps off the fittings.
- Adjust track tension and check hydraulic pressure.
- Dozens of other checks. Time spent ranges from about 45 minutes to over 5 hours per machine, depending on the model (an R32 gets about 3.5 to 3.75 hours of labor).
NOW WITH ACCOUNTABILITY
- The checklist is a two-page form signed by whoever did the work, and the person responsible for the machine signs overall.
- You will be able to call and talk to the person who worked on your machine, not a factory.
- We plan to email or text you the signed checklist so you can see it was done.
- The inspection date may be earlier than your delivery date, and that's fine.
SEE IT YOURSELF
- The full checklist is on our website under Company Information, Service. If you think we should add something, tell us.
Questions? Call Rippa USA Sales at 817-382-3201 or visit RippaUSASales.com. We deliver nationwide with flat rate shipping, and you get 50% off attachments when you buy a machine from us.
