Watch the video: https://www.youtube.com/watch?v=vrh8W7Q6eVQ (5 min)

Operator safety, part 2. Mike from Rippa USA Sales explains why you should always disconnect the hydraulics before you get in or out of an excavator, even if you are only stepping out for a moment. If you have not seen part 1, watch...

Watch the video: https://www.youtube.com/watch?v=9LwngYaanjE (8 min)

Mike from Rippa USA Sales talks through bucket angle on a mini excavator and why it matters for digging power, trenching and backfilling. About half of his customers are new to excavators, so this is a basic skill worth learning ear...

Watch the video: https://www.youtube.com/watch?v=sH9vTfa5XpQ (5 min)

Mike from Rippa USA Sales shows how to update the firmware on the display computer in a Rippa R18, R22 or R32 mini excavator so the temperature reads in Fahrenheit instead of Celsius. This is part 1 of 2.

BACKGROUND

These machines are...

Watch the video: https://www.youtube.com/watch?v=4P7VgLFtCd8 (2 min)

Part 2 of the firmware update on a Rippa R18, R22 or R32 mini excavator. Mike from Rippa USA Sales shows what to do once the update has run. Watch part 1 first, and check with your dealer that your computer is the correct version be...

Watch the video: https://www.youtube.com/watch?v=1vzvzcfGOWA (3 min)

Mike from Rippa USA Sales shows what to do if you ever need to replace the display computer on a Rippa R18, R22 or R32 mini excavator, whether it is a warranty replacement or a new unit you buy.

WHAT YOU GET

The replacement arrives as...